modulus of strain hardening

modulus of strain hardening
moduł umocnienia

English-Polish dictionary for engineers. 2013.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Work hardening — Work hardening, also known as strain hardening or cold working, is the strengthening of a metal by plastic deformation. This strengthening occurs because of dislocation movements within the crystal structure of the material.[1] Any material with… …   Wikipedia

  • Stress–strain curve — During testing of a material sample, the stress–strain curve is a graphical representation of the relationship between stress, derived from measuring the load applied on the sample, and strain, derived from measuring the deformation of the sample …   Wikipedia

  • Viscoplasticity — Figure 1. Elements used in one dimensional models of viscoplastic materials. Viscoplasticity is a theory in continuum mechanics that describes the rate dependent inelastic behavior of solids. Rate dependence in this context means that the… …   Wikipedia

  • solids, mechanics of — ▪ physics Introduction       science concerned with the stressing (stress), deformation (deformation and flow), and failure of solid materials and structures.       What, then, is a solid? Any material, fluid or solid, can support normal forces.… …   Universalium

  • Dislocation — For the syntactic operation, see Dislocation (syntax). For the medical term, see Joint dislocation. In materials science, a dislocation is a crystallographic defect, or irregularity, within a crystal structure. The presence of dislocations… …   Wikipedia

  • Hooke's law — models the properties of springs for small changes in length Prof. Walter Lewin explains Hooke s law, in …   Wikipedia

  • T-criterion — The T failure criterion [Andrianopoulos, N.P., Atkins, A.G., Experimental Determination of the Failure Parameters ΤD,0 and ΤV,0 in Mild Steels According to the T criterion, ECF9 Reliability and Structural Integrity of Advanced Materials, Vol. III …   Wikipedia

  • metallurgy — metallurgic, metallurgical, adj. metallurgically, adv. metallurgist /met l err jist/ or, esp. Brit., /meuh tal euhr jist/, n. /met l err jee/ or, esp. Brit., /meuh tal euhr jee/, n. 1. the technique or science of working or heating metals so as… …   Universalium

  • Yield (engineering) — The yield strength or yield point of a material is defined in engineering and materials science as the stress at which a material begins to deform plastically. Prior to the yield point the material will deform elastically and will return to its… …   Wikipedia

  • Structural engineering — is a field of engineering dealing with the analysis and design of structures that support or resist loads. Structural engineering is usually considered a speciality within civil engineering, but it can also be studied in its own right. [cite… …   Wikipedia

  • Deformation (engineering) — This article is about deformation in engineering. For a more rigorous treatment, see Deformation (mechanics). Compressive stress results in deformation which shortens the object but also expands it outwards. In materials science, deformation is a …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”